网站地图关于我们

查看相册 View Gallery
教程:室内空间色彩研究第1张图片

沙漠住宅的室内研究专题
Desert Abstract Interior Studies

由专筑网李韧,王帅编译

这组图像是沙漠住宅的内部空间,我偏爱极简的色彩与材质的表达,因此我希望通过本次研究来改变一些思维方式。同时,外部空间渲染需要更多的严谨性与细部表达,因此我希望内部的空间构图能够给大家带来一些乐趣。另外,在极简图像的表达中,如果能够增加一些细部纹理,则可以有效地提升画面的质感。以下是图像的分解表达:

I decided to go abstract with this latest post. With this set of illustrations, I have been studying the interior spaces of the Desert House. I tend to prefer interiors with minimal color and material, so I generated these studies as a way to force me out of that way of thinking. Also, the exterior renderings were a little more serious and detailed, so I wanted to switch things up and have a little fun with these. One thing about minimal images is that inserting just a little texture can really change the reading of the illustration. In this case, just a hint of plaster texture on the walls gives the images a painterly quality. Below is a quick break down of one of the images.


1、V-Ray基础渲染

教程:室内空间色彩研究第2张图片

在进行V-Ray基础渲染时,我只是运用了一些简单的色彩,后期,我在PS中还会调整这些色彩。

1. V-Ray Base Rendering
For the V-Ray base rendering, I simply applied some colors close to what I was looking for knowing that I would tweak them later in Photoshop.

教程:室内空间色彩研究第3张图片

V-Ray渲染中的材质ID对我来说非常重要,因为它能够让我进行快速地选择。每个颜色都代表了一个区域,这个区域在后期PS处理中能够呈现出特别的颜色。在这篇文章中我会着重谈论材质ID。

The Material ID that rendered out of V-Ray was crucial for me to make fast selections. Each color represents a zone that will take on a very specific color in Photoshop. I have talked about Material ID in more depth in this POST.


2、添加色彩

教程:室内空间色彩研究第4张图片

接下来,我选中每个不同区域的颜色,然后在PS中为它们单独创建图层蒙版,这样我就能够自由地控制单个色彩。在上图中,我对中央的粉色区域进行了调整,让其亮度和饱和度变得高一些。在这些图像的表达中,我不想过于让图面看上去过于写实,因此我弱化了一些阴影。

2. Add Color
Next, I took each zone of color and created a mask of that specific area in Photoshop so that I could dial in the color. In the image above, I adjusted the center pink zone to be lighter and more saturated. I wasn’t trying to be realistic so I wasn’t concerned about washing out the shadows a little bit.

教程:室内空间色彩研究第5张图片

在我对每个色彩区域都进行适当的调整之后,最终效果如上图所示。

Above, the image shows what the illustration looked like once I had all of the colors adjusted in each zone.


3、肌理

教程:室内空间色彩研究第6张图片

教程:室内空间色彩研究第7张图片

然后,我在墙面上添加一些石膏肌理,这样色彩看上去更有质感。我一般在PS中进行这些处理,因为这样我能够控制肌理的强度。另外需要注意的是,我会将石膏肌理进行一些扭曲调整,这样能更好地适应墙体的角度。这听起来有些复杂,这是因为我并没有使用之前提及的图层蒙版,否则可以让操作速度变得快一些。

3. Texture
I added a simple plaster texture to all of the walls to break up some of the smoothness of the color gradients. I wanted to do this in Photoshop so that I could dial in how strong the texture was. It is important to note that I still distorted the perspective of the plaster texture to match the wall angles. If it sounds like a lot of work, it isn’t because I was able to use the color zone masks used in the previous step to speed this process up.


4、色彩匹配与噪点

教程:室内空间色彩研究第8张图片

教程:室内空间色彩研究第9张图片

然后我对整体图像进行调整,首先我将画面整体提亮,提升色彩饱和度,同时增加了一些噪点,关于噪点的添加我将在稍后说明。

4. Color Adjust and Noise
At this point, I began adjusting the overall image. I first lightened the images and increased the saturation. I also added just a hint of noise. I describe how to add noise in step six of this POST.


5、HDR贴图

教程:室内空间色彩研究第10张图片

最后,我添加了HDR贴图,增大了图像对比度与肌理感,我通常使用Topaz来制作HDR效果。

5. HDR
Finally, I added a slight HDR effect that amplifies the contrast and textures. I used Topaz to generate the HDR effect.


最终成图
Final Images


教程:室内空间色彩研究第11张图片

教程:室内空间色彩研究第12张图片

教程:室内空间色彩研究第13张图片

教程:室内空间色彩研究第14张图片

教程:室内空间色彩研究第15张图片

教程:室内空间色彩研究第16张图片


出处:本文译自visualizingarchitecture.com/,转载请注明出处。

【专筑网版权与免责声明】:本网站注明“来源:专筑网”的所有内容版权属专筑网所有,如需转载,请注明出处

专于设计,筑就未来

无论您身在何方;无论您作品规模大小;无论您是否已在设计等相关领域小有名气;无论您是否已成功求学、步入职业设计师队伍;只要你有想法、有创意、有能力,专筑网都愿为您提供一个展示自己的舞台

投稿邮箱:submit@iarch.cn         如何向专筑投稿?

扫描二维码即可订阅『专筑

微信号:iarch-cn

登录专筑网  |  社交账号登录:

 匿名

没有了...
评论加载中,请稍后!

教程 (329 articles)


室内 (2886 articles)


居住空间 (878 articles)


住宅 (3204 articles)


沙漠 (29 articles)


色彩 (70 articles)


Alex Hogrefe (115 articles)


2018 (969 articles)


渲染 (135 articles)


vray (67 articles)